Paint Correction and Ceramic Coating

For outstanding durability and a tough insensitivity to abrasion from everything harming your ride, choose our paint correction and ceramic coating services and give your car a new life.

Eliminate Paint Defects & Protect Your Paint Long-Term

About Our Paint Correction Services

During this service, we use professional-grade machinery and lighting, wet sanding, compounds and skills to reduce or eliminate paint defects.

About our Ceramic Coating Services

This service usually follows a paint correction. We apply a highly advanced nano-ceramic coating that adds years of protection & ease of maintenace.

How Are Ceramic Coatings Installed?

Installing a ceramic coating is an extremely tedious process. Below is a breakdown of how ceramic coatings are installed.

100% Hand Car Wash

Using PH neutral soap and a clean wash mitt and safe towel to dry.

Paint Decontamination

Clay bar treatment to mechanically decontaminate the paint followed by a chemical decontamination with iron removers.

Labor intensive Machine Paint Correction

We must make your car's paint as close to perfect as possible so that we don't seal those defects under the coating.

Surface Cleansing Coating Prep

We apply an alcohol-based cleansing solution to give the coating a proper surface to bond too. Unlike wax coatings bond to your clear coat.

Tedious Panel by Panel Installation

We apply the coating panel-by-panel with an applicator and special soft towels to prevent further damage.

CERAMIC COATING LEVEL 1
$350-$550

CERAMIC COATING LEVEL 2
$650-$850

CERAMIC COATING LEVEL 3
$950-$1250

CARPRO FlyBy FORTE
$150

Windshield & Glass Coating

CARPRO DLUX
$350

Plastic & Wheel Coating

CARPRO LEATHER
$450

Stain & Dye Protection

Need Help?

FAQs

Your ceramic coating questions answered.

What is Ceramic Coating? Industry-grade ceramic coating is a chemical polymer solution that is applied to the exterior of a vehicle to protect it from external paint damage. Typically applied by hand, it blends with the paint of your car and creates an additional hydrophobic layer of protection.

Installing a ceramic coating is an extremely tedious process. Below is a breakdown of how ceramic coatings are installed.

100% Hand Car Wash
Using PH neutral soap and a clean wash mitt and safe towel to dry.
Paint Decontamination
Clay bar treatment to mechanically decontaminate the paint followed by a chemical decontamination with iron removers.
Labor intensive Machine Paint Correction
We must make your car’s paint as close to perfect as possible so that we don’t seal those defects under the coating.
Surface Cleansing Coating Prep
We apply an alcohol-based cleansing solution to give the coating a proper surface to bond too. Unlike wax coatings bond to your clear coat.
Tedious Panel by Panel Installation
We apply the coating panel-by-panel with an applicator and special soft towels to prevent further damage.

Ceramic coatings last anywhere from 6 months to 7+ years depending on the formula.

The cost of a ceramic coating ranges from $300 – $3000 depending on two factors. How much paint correction is required & how much durability is desired.

Removing a ceramic coating requires labor intensive cutting and polishing with a machine polisher, pads, and abrasive compounds. You must be very careful to not go past the clearcoat.

A ceramic coating bonds to your clear coat and a wax does not. A wax also diminishes with heat and chemicals ceramic coatings are chemically and UV resistant.

The installation of a ceramic coating can take anywhere from 6-15 hours depending on the condition of your vehicles paint since most of the time is spent in paint correction pre-install.

The best way to maintain a ceramic coating is to hand wash your vehicle using a PH balanced soap diluted properly. You should consider drying the vehicle with a blower or extremely soft towel with little pressure.

WATER SPOT RESISTANCE
Improved formulation to increase the resistance of water spotting on coated vehicles

SUPERB HYDROPHOBIC QUALITY
Water contact angle that surpasses 110° and retaining close to this angle for a long periodDEEP GLOSS
Unmatched gloss that lasts years.

EASE OF MAINTENANCE
Surface stays clean for a longer period thanks to the anti-fouling effect